الاثنين، 3 أبريل 2017

تنظيف خزانات بالرياض

Providing sanitary conditions and controls for cleaning and disinfection of drinking water reservoirs. Washing and disinfection of drinking water tanks shall be considered in order to prevent diseases caused by contaminated water and to maintain public health.

 When using the tank for the first time (new tanks).
 To ensure the safety and cleanliness of the reservoir continuously washing league ) .
 When the tank is contaminated as a result of maintenance or other factors affecting the cleanliness of the tank.
Professionalism is the title of work within the company and the main reliance on superior quality in the operations of cleaning the tanks of customers in Riyadh
We seek to provide the best tank cleaning services in Riyadh
We have developed tank cleaning services in Riyadh, our company upscale house always strive for innovation and performance strength:
 The washing process is carried out at the highest level of technical and scientific efficiency in accordance with the instructions of the Ministry of Health.
 Sterilization and washing of drinking water tanks is carried out by a specialized team of the company.
 The materials used for sterilization are those authorized by the Ministry of Health.
 Sterilization and washing tools Sterile tools only used once.
 The company takes care not to waste water during the washing process.
 Periodic maintenance of the tanks during the washing process.
 Laundry is done once a month or more and there is a discount for the annual contract.
 Drinking water wash tanks can be installed in all types and sizes.
 You get (water pressure _ water purity _ healthy water).
At Al-Bait Al-Raqi Co., we provide tank cleaning services in Riyadh with innovative knowledge through creative engineers who seek to carry out the work with full professionalism.
Sanitary conditions and controls for cleaning and disinfection of drinking water tanks:
Due to the importance of the safety of the drinking water tanks and the public health concern, the drinking water tanks are cleaned in the following cases:

When using the tank for the first time (new tanks).
To ensure the safety and cleanliness of the reservoir continuously washing league ) .
When the tank is contaminated عزل خزانات واسطح due to one of the following reasons:
The water that feeds the tank is contaminated, whether from the public network or through the whites.
The presence of cracks in the walls of the tank led to the infiltration of water or sewage water (Piyarat) into the tank.
The absence of a cover for the tank or a cover with no sealing or openings in the area surrounding the cover resulting in the entry of insects, dirt or contaminated water into the tank.
Our company is a tank cleaning company in Riyadh offering our customers professional services with innovative technological strategies,
Companies and establishments engaged in cleaning and sterilizing drinking water tanks shall comply with the following conditions and controls:

Cleaning of new ground and upper tanks:
The stop valve leading to the network shall be closed. In case of water inside the tank, it shall be withdrawn to the public sewage network or local sewerage network in the absence of a public sewage network.
The residues inside the tank shall be lifted, whether sand, dust, algae, sediment, wood or the like. The walls of the tank shall be inspected for safety and free from cracks.
A concentrated chlorine solution is made for the method of chlorine solution for washing the tanks at a concentration of at least 50 ppm (50 mg / l) and the amount of the solution is sufficient to wash the walls and ceiling of the tank.
The worker is washing the walls and ceiling of the tank with a brush to remove any plankton or algae by spraying the chlorine solution first on the walls and then using the brush
The washing water is withdrawn to the sewerage network and then the tank is filled with clean water at a height of half a meter for use in washing the walls and ceiling by spraying it with buckets to remove any traces of chlorine or sediment and then withdrawn to the sewerage network, preferably repeated this process several times.
The tank is filled with clean water and sterilized.
Place the tank lid and make sure it is sealed with a note that the level of the ground tank is raised from the floor tile by about 15 cm and there are no cracks or openings next to the tank hole.
The sterile water shall be raised from the lower tank (ground) to the upper tank after washing it as mentioned above for the ground tank.
After about one hour of filling the upper tank, water is withdrawn by opening all the taps of the house to wash and disinfect the home network. During this process the chlorine content in the water is measured to be between 0.2-0.5 ppm.
After washing, the bottom tank water is supplemented and the chlorine content is adjusted to 1 ppm.
Periodic cleaning of unpolluted tanks:
The valve leading to the grid shall be closed and all water in the tank shall be withdrawn and the walls and ceiling shall be inspected for safety and free from cracks.
In case of any sediment at the bottom, remove the bottom and walls with chlorine solution at a concentration of at least 50 ppm and using a brush.
Laundry water is withdrawn to the sewage system
An external inspection of the tank shall be carried out to investigate the causes and sources of contamination by ensuring that there are no cracks in the roof and walls of the tank or openings in the area around the nozzle of the tank and that there is a cover that locks the opening to prevent water from entering the tank.
All water in the tank shall be discharged and discharged to the sewerage network. The walls and ceiling shall be inspected from the inside to detect any cracks or cracks.
The tank is left empty for 24 hours to detect any new water leaks into the tank
 After the discovery of the causes of pollution are working to remove them and avoid their occurrence in the future in accordance with the technical procedures followed.
Wash the tank with chlorine for cleaning the new floor and upper tanks.
If it is discovered that the contamination is caused by the contamination of the well that feeds the tank, this is replaced